Home › Furnace filters › S9V2
The Trane S9V2 gas furnace uses one of 5 filter sizes, depending on cabinet width (or model) and return location: 16x25x1, 14x20x1, 20x25x1, 16x20x1, 24x25x1 (per the Trane document cited on this page). The page's table shows which size applies to each cabinet and return.
Verified from manufacturer doc 2-stage condensing variable-speed furnace
| Furnace width | Upflow | Downflow |
|---|---|---|
| 17-1/2 in. | 1 – 16 x 25 x 1 | 2 – 14 x 20 x 1 |
| 21 in. | 1 – 20 x 25 x 1 | 2 – 16 x 20 x 1 |
| 24-1/2 in. | 1 – 24 x 25 x 1 | 2 – 16 x 20 x 1 |
For upflow airflow above 1600 CFM, Trane requires return openings and filters on both sides, one side plus the bottom, or the bottom only. Heads-up: Trane's 2015 S9V2 product handbook lists 17 x 25 x 1 for 17-1/2 in. upflow models. Measure your existing filter.
General guidance (not from this manual): check monthly and replace 1-in. filters every 1–3 months, or follow the filter maker's guidance and your owner's manual.
Pull the old filter and read the size printed on its frame. Nominal sizes are rounded up: a 15.5 x 24.5 in. filter is sold as 16 x 25.
Your furnace manual lists the filter's dimensions, not its MERV rating. Higher-MERV filters restrict more air. Manufacturers such as Carrier recommend keeping the clean-filter pressure drop under 0.2 in. w.c. (ideally under 0.1). Lennox warns that an over-restrictive filter can trip the high limit in winter and freeze the coil in summer. If you want MERV 11–13, a 4-in. media cabinet is the usual route. Ask an HVAC tech to check static pressure. Nominal sizes are rounded: a filter labeled 16 x 25 x 1 actually measures about 15.5 x 24.5 x 0.75.
Installer's Guide 18-CE01D1-1E-EN, Upflow / Downflow Return Air Filters tables
Last checked 2026-10-21. Manufacturers revise documents. If your unit's label disagrees, trust the label.
The Trane S9V2 gas furnace uses one of 5 filter sizes, depending on cabinet width (or model) and return location: 16x25x1, 14x20x1, 20x25x1, 16x20x1, 24x25x1 (per the Trane document cited on this page). The page's table shows which size applies to each cabinet and return. 17-1/2 in. – 1 – 16 x 25 x 1 – 2 – 14 x 20 x 1; 21 in. – 1 – 20 x 25 x 1 – 2 – 16 x 20 x 1; 24-1/2 in. – 1 – 24 x 25 x 1 – 2 – 16 x 20 x 1.
General guidance (not from this manual): check monthly and replace 1-in. filters every 1–3 months, or follow the filter maker's guidance and your owner's manual.
Filter sizes are nominal (rounded). A filter sold as 16 x 25 x 1 actually measures about 15.5 x 24.5 x 0.75 in. Buy by the nominal size printed on the frame.
Installer's Guide 18-CE01D1-1E-EN, Upflow / Downflow Return Air Filters tables (https://www.trane.com/content/dam/Trane/Commercial/global/products-systems/equipment/unitary/split-systems/Small%20Splits/Furnaces/18-CE01D1-1E-EN_11112016.pdf), last checked 2026-10-21.